DC Centrifugal Pump

Category:

Description

  • Designed & manufactured in the UK
  • Brushless DC Motor
  • High temperature handling
  • Flow control in your hands

Our SP Pump is a Heavy Duty Centrifugal Pump designed to operate for 10,000+ hours with fluids between -40°C to 85°C. Our pump is suitable for a number of applications requiring temperature control, including (but not limited to): Hybrid Vehicles, Laser Cooling, Agriculture, Beverages, and Marine.

Our SP22 and SP32 Centrifugal Pumps feature a Brushless DC Motor which has a number of advantages such as variable speed drive, high efficiency, and many more you can read about in our SP Technical Guide.

Whatever your pump application, don’t hesitate to get in touch with the team and we will find a pump to suit your needs!

Benefits of our Brushless DC Centrifugal Pump

 

Robust Design

Designed and manufactured in the UK by our dedicated team of engineers on the South Coast.

Variable Flow Control

Based on customer preference this may include CAN (Controller Area Network) control, PWM or stand alone installation.

Variable Speed Drives

Our Centrifugal Pumps can be operated at a wide range of speeds, controlled through a closed loop motor speed control.

 

High efficiency

As the pump has variable speed drives, controlled by the cutomer for your particular application, it significantly reduces the amount of wasted energy during operation. This means pumps will not be operated at speeds faster than is required and ensures that the pump operates efficiently. Additionally, the brushless motor maintains high efficiency for the whole life of the motor, unlike brushed motors which tend to have a decreased efficiency towards the end of the brush’s life.

 

External Control

There are a vast range of external control strategies, including external CAN control signals.

 

Additional benefits include:

  • Water resistant
  • Quiet operation
  • Available in CAN and PWM

 

Technical Details

Dimensions X=239mm / Y=154mm / Z=147mm
Core Materials Aluminium body & head, brushless motor
Connections All available
Fuse Size 20A (recommended)
Maximum Current 19A
Maximum Flow Rate 120l/min
Maximum Pressure 2.2 Bar
Weight 3.9kg
Motor Life 10,000+ hours
Head Orientation 90° x 4 options
Inlet & Outlet size 1″ / Ø25mm
Fluid Temperature -40°C to 85°C
Ambient Temperature -40°C to 85°C
Storage Temperature -55°C to 95°C
Voltage 18V – 32V

 

Available in SP22 and SP32.

The SP range comes with 2 years warranty.

Troubleshooting

Fault

If you’re having the following fault with your pump, here’s a check list to rectify them. If you continue to have problems with your pumps, please get in contact with the team.

Pump not turning

  1. Check electrical connection
  2. Check ignition wire
  3. check if ignition wire is ‘ON’
  4. Verify pin location

Pump is running but not pumping fluid

  1. Check System fluid level
  2. Check for hose restrictions (kinks)
  3. Make sure pump is primed
  4. Check for collapsed inlet or outlet hose
  5. Check pump inlet for trapped debris

No CAN communication and/or pump not responding to CAN commands

  1. Check communication harness wiring
  2. Verify that CAN messages are being transmitted in the correct formats
  3. Verify that correct component CAN address is being used
  4. Ensure correct baud rate is selected, this can be set via the pump software

Pump bearings are making a grinding noise when running

  1. Replace pump

Pump is leaking excessively while running

  1. Replace pump. No action is required by customers for pump exhibiting acceptable leakage